At the throttle

Train Blog

October 24, 2015

OpsLog – SR – 10/22/2015

kay, so we’re up in Asheville for a model railroad operations weekend, running on a layout that’s modeling… Asheville. Our first run on the weekend (after a marathon crazy ten hour drive to get here) was Wally Brown’s Southern Railroad, Asheville Division. It’s a tight pike with Ashville dead center and trains coming out to run the main loop correctly using the wye at Old Fort. A lot of fun here, because just about every train enters/exits the line at this location, locals work here, and most of the passenger trains turn here. So it’s busy and requires lots of […]
October 17, 2015

OpsLog – FEC – 10/17/2015

ot much to write about when a session goes as well as this one. The trains were running ahead of schedule. Nobody I saw plugged the main. The new card forwarding system worked well. Oh, there was a broken coupler and a sticking wheel and a couple of derailments, but that’s model railroading. Good for all attending, but not good for blogging. Blood on the tracks – that’s what brings in the eyeballs. Still, I can tell you that being part of a spotless session can be a lot of fun. I was rolling into Palm Bay in the seat […]
October 4, 2015

ShowLog – Deland – 10/3/2015

ow much fun can a train show be when it starts with you sitting in your car in an empty fairgrounds in the pre-dawn dark, feeling a kidney stone grinding through your guts and hoping ferchristsakes that that pain pill is going to kick in and theburning agony will end? Well, quite a lot of fun, it seems. Set up had solid attendance – lots of membership showed up and the layout went up nice and easy. We had eighteen feet of new scenery, mostly forested but with some scratch built structures (some even showing up the day of the […]
September 23, 2015

OpsLog – LM&O – 9/23/2015

sually this set of SP black widow F’s is on the point of 373 and 374, the intermodal service from Watsonville to San Luis Obispo. They’ve run up and down that route for years. But today I put them on the Zanesville local, running through the Pennsy highlands, working a cut from Martin Yard to Carbon Hill and back (with most of its work in Zanesville). So, yeah, out of place a bit. But fun. I sorted out the cuts on the lead track to the auto plant, and worked one side of the line, then the other, nice and […]
September 20, 2015

OpsLog – WPR – 9/19/2015

‘m on the Denver platform, watching a standard gauge crew drive standard gauge rails through the midst of the Western Bay Railroad’s narrow gauge yard. Wonder if SP will be hiring? Frowning, I’m checking my watch – just got in from another train and am conducting Number 2 back to Alamosa. It’s almost 2pm, the platform is filled with passengers yet the tracks are empty. Where’s our train? My engineer comes up, a guy I’ve never run with but we exchange courtesies and decide who’s going to do what and confirm waterstops and so forth. Out in the yard. I […]
August 26, 2015

OpsLog – LM&O – 8/26/2015

onight was a pretty amazing night at the club, full of all sorts of highs and lows. Route 50 is just a disaster, especially when it rains. It’s like running on a layout with a new dispatcher, everyone waiting for each other. When I finally got out, I saw four cars in the parking lot. Well, this was shaping up to be a disaster. But eventually people trickled in, held up by the road delays. We actually staffed up for a pretty decent session. I gotta say, it all was worth it early on in the session – had 202 […]
August 22, 2015

OpsLog – FEC – 8/22/2015

t was one of those days… I walk into the session’s crew lounge, the only guy who forgot to wear his new FEC shirt (embroidered!). Everyone else was blue and snazzy. I had an old Daylight shirt on. Strike one! At the panel, the clock is hot. The first train is rolling for Titusville. I checked, double checked, even gave the train a rollby. I was certain I had it routed right out of the yard. Yet it ended up in Palm Bay, not Titusville. Had to back him all the way to the yard and come out the right […]
August 16, 2015

OpsLog – L&S – 8/16/2015

he Longwood & Sweetwater, always an old favorite that’s been down too long. Ran with a couple of the boys and had a great time. Came to realize two things while switching Altamonte today. See, Altamonte is not for the timid nor the short – you need to get under benchwork to switch it and it requires a long reach. That I’ve got. So I’ve run this one more than just about anyone on the planet. The thing is, I’ve really got it down. I moved the cars in, cut them off on the holding track, methodically plucked the outbounds, […]
July 25, 2015

OpsLog – FEC – 7/25/2015

hen working a switching puzzle, there comes a tipping point when you go from moving cars this way and that (while holding your breath) to seeing the solution. I clearly remember that moment today while working the Rinker Plant in Eau Gallie. Now I’ve seen ever possible cheat on this, from people using the main as extended storage to people lifting a car from one track to another (sorry, Ken, but some people panic when they deadlock). I’ve done the job once before and the first time was a bit of a snarl. This time I had a better feel […]
July 22, 2015

OpsLog – LM&O – 7/22/2015

eash. Can it be a crazier session? I’m trying to run the panel. Out in the main room, two of my crews are bellowing at each other like a pair of velociraptors in heat (about the Battle of Midway, I think). Of of the locals is solving his switching puzzle the way a computer would do it (trying every possible combination) while the other has been abandoned by its velociraptor engineer. We lost a switch machine early (wait, no we didn’t, wait, yes we did). And sometime during all this nuttiness, I’m supposed to be dispatching. Got the local chip […]